NO HOT WATER? Follow These Simple Tips
NO HOT WATER? Follow These Simple Tips
Blog Article
We've stumbled on this post on How to Troubleshoot and Repair an Electric Water Heater directly below on the net and decided it made good sense to relate it with you in this article.
Many modern-day homes make use of an electric hot water heater for their heating system, due to its convenience and ease of use. However, just like any other electrical appliances, problems may arise with its usage, all of a sudden. It can be actually frustrating to awaken to a cool shower as opposed to a warm one or having your bathroom with water that isn't warm sufficient and even as well hot. Whatever the case may be, water heater troubles can be rather stressful. Luckily, we've made a listing of possible remedies to your hot water heater concerns. There are a variety of aspects that can create a number of these troubles, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the primary power supply for safety. Whatever the trouble is, getting it taken care of ought to not pose way too much of a problem if you follow these actions:
Check Your Power Supply:
As fundamental as this might appear, it is very essential. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water instantly retires is to confirm that it isn't a power problem. Examine if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the problem, simply turn it on and off once again. Replace any kind of broken or damaged fuse. Examine the home appliance with power after these changes to see if it's currently functioning.
Check the Burner in the Water Heater:
If it's not a power issue, after that attempt looking into your burner if it is still functioning. Check each of your burner to be sure the trouble isn't with any one of them. If any of them is damaged, replace that component and then inspect whether the hot water is back on.
Check Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm enough, you may require to check the temperature level settings on your top thermostat. Guarantee the breaker is switched off before doing anything. Open the gain access to panel and also press the red switch for temperature reset over the thermostat. This must aid heat up the water. Turn the circuit breaker back on as well as inspect if the issue has been settled.
Call A Specialist:
If after changing all defective components and resetting your temperature level, the hot water heater still isn't working, you might require to get in touch with a specialist plumber for a professional viewpoint. The problem with your heater could be that the hot and cold faucets have actually been switched or it may be undersized for the amount of warm water required in your home. Whatever the situation may be, an expert plumber would help address the trouble.
Conclusion
Hot water heater problems are not always significant. A lot of them result from minor issues like a blown fuse or worn-out heating element. Replacing the damaged parts ought to suffice. Nevertheless, if you are still not able to fix the trouble, give a call to your nearby plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I came across that article about What Would Cause My Electric Water Heater to Stop Working? when doing a lookup on the search engines. Loved our article? Please share it. Help someone else find it. Thank-you for taking the time to read it.
Schedule Now!
Report this page